Home  |  Company   |   Solutions   |   References & Markets   |   News & Events  |   Support  |  Contact

  
       
NL  FR  EN   DE  CZ

November 2006 

  
 
   
  Customers can help each other. Join us making the SCIA Forum a real success!
Register today ...
   
  SCIA values your feedback. Please use this form for sending us your remarks, ideas and suggestions which help us improve our services.
   
   
   
  SCIA takes part in the "Betondag 2006" in "De Doelen" in Rotterdam on 16 November 2006. You can find us on stand nr. 23. Mr. Herman Oogink (SCIA) will give a lecture on BIM in the 'Van Capellen' meeting room. more ...
   
  SCIA participates in the "Industrie & Projectbouw" fair in Antwerp Expo on 21 and 22 November 2006.
You can find us on stand nr. 3512. more ...
   
   
  Recently the following new software version has been released:
»
 Allplan 2006.1_4
  As a customer you have the possibility to download
these in our protected download section.
   
   
  In November and December a lot of trainings are organised in our offices of Herk-de-Stad and Arnhem with, among others, the following topics:
»
 Basis course SCIA•ESA PT
»
 Basis course Allplan
»
 SCIA•ESA PT, Tips & Tricks
  ...
   
  Here you find all training dates with a programme overview and you can register online.
   
   
  SCIA's customers are invited to add their job vacancies free of charge in our 'SCIA Jobs Network'.


Please also check SCIA's Job Openings. Good luck!
   
   
Some screenshots from SCIA•Pipeline
   
 
   
 
   
  You can find our new SCIA•Pipeline brochure in our 'free download section'.
   
   
 
   
  SCIA recommends the recently published book by our colleague dr. Jaroslav Navratil: 'Prestressed Concrete Structures'.


<printable version>

Dear readers,

For the race fanatics among us we offer the possibility to cast a glance at the new plans for the infrastructure works at the racetrack of Francorchamps (B), but also for those not interested in racing the plans are masterly examples of the capability of Allplan Architecture.

Furthermore our Czech colleague, Jaroslav Navratil, has written a very interesting book on a difficult matter: “Prestressed Concrete Structures”. This book is available in a limited edition and can be ordered on SCIA’s website. But before you purchase this interesting book, we invite you to take the time to go through the following interesting reading material. Have a nice read.

» Corporate News: SCIA Releases Publications on Cutting Edge Technological Innovations
» Product News: Overall Optimal Design of Structures in SCIA•ESA PT 2007
» The Market: The German ‘Public Works Building Sector’ joins again with the European growth
» Customer's Project: F1 circuit of SPA - FRANCORCHAMPS
» Tips & Tricks: Overview drawings in circular line grids in SCIA•ESA PT

       
   
 SCIA Releases Publications on Cutting Edge Technological Innovations  
 
Know-how transfer is a key factor for the success of a tech company such as SCIA.
In this eNews two publications are announced.

The first is a book written by dr. Jaroslav Navratil, titled "Prestressed Concrete Structures". J. Navratil is a senior functional engineer and manager at our Brno Office in the Czech Republic. He is also teaching at the University of Brno. His book describes the essentials of Prestressed Concrete, as well from the viewpoint of the structural designer as from the practical execution. SCIA, together with other partners, has sponsored the edition of this important book, available in English and Czech language.

The second publication is a white paper on structural optimization: "Overall Optimal Design of Structures". SCIA has succeeded in offering an automated methodology, embedded in our standard software, to optimize structures. Parameters, constraints and goal function (e.g. minimum weight, maximum bearing load, …) are defined by the users themselves.

We kindly invite you to read these publications! 		 
 
   Overall Optimal Design of Structures in SCIA•ESA PT 2007  

Most CAE software products announce: “Our software helps you to make an optimal design of your structures”. Is this achieved in reality?

In common sense one talks about optimisation of structures, but in fact one optimises only a few chosen structural parts. A design engineer searches for the minimal size of the cross-section that satisfies the design code, he/she tries to find the minimal number of bolts needed in a specific steel connection, he/she is searching for minimal required area of reinforcement steel in a concrete beam. All structural parts are designed optimally, yet it does not mean that the whole structure is optimal for instance from the point of view of cost of material, time of construction, price of labour, etc.

An optimal design of a structure is found when many variants are tried and compared. Everybody will agree, but how many times it is a real case in the construction industry?

A typical example concerns a reinforced concrete beam. At the start the dimensions of the cross-section are preselected, then the internal forces are calculated and the reinforcement is designed, optimally of course. Yet who plays a little bit more with the height and width of the beam to find an optimal ... more

  
   
 The German ‘Public Works Building Sector’ joins again with the European growth  
 
After ten years of difficulties, the German ‘Public Works Building Sector’ has got out of a jam, as declared by the president of the German federation of the sector. The sector wishes to become again the growth engine of the first economy of the euro zone.

“For the first time in a decade we see a revival, according to Hans-Peter Keitel, owner of Hochtief, the first ‘Public Works Building’ group of the country. We are on our way to turn from a sick child into the engine of the German economy”, he added, also recalling that the building sector had always been one of the major forces of the country.

According to the figures from January to July, published by the federation, the amount of orders increased by 8,4%, while the sales turnover of the actors of the sector increased by 2,1%.
For the whole of the year, the branch counts on a growth of ... more		  
   
   F1 circuit of SPA - FRANCORCHAMPS  
 
This project concerns the realization of the new infrastructure works (stands, parking places, paddocks, new chicanes…) for the F1 racetrack of SPA - FRANCORCHAMPS.

It includes:

  • the construction of a building with a total surface of 16.500 m ², to be divided in:
    • 42 F1 stands of 125 m ² each;
    • the infrastructure for the FIA, FOM, Race Control, for the written and spoken press, social buildings, sanitary facilities…
    • a paddock ‘closed club’ with a surface of 3.100 m ²;
    • a paddock ‘open club’ with a surface of 5.500 m ²;
  • the realization of grandstands to shelter about 20.000 people (all stands will be equipped with their own sanitary facilities);
  • the realization of a new straight starting line of more than 500 meters of length;
  • the realization of a new chicane and required safety infrastructure works;
  • this project is carried out in collaboration with the architect’s firm ... more
 
   
   Tips & Tricks: Overview drawings in circular line grids in SCIA•ESA PT  
 

An easy tool in SCIA•ESA PT is the possibility to automatically generate overview drawings according to previously defined planes of the line grid.

However, while working with a circular line grid, it seems that the labels of the planes for which the overview drawings should be generated are not displayed, so it is impossible to see which plane number is needed.
This is due to the fact that, by default, the labels are displayed at the beginning of the grid lines. With circular line grids they all coincide at the centre of the grid. This would make the drawing very complex and thus the labels are omitted.

The solution is setting the labels at the end of the grid lines, instead of at the beginning.

Opening the tab “Drawing setup” in the "line grid" manager can do this. Here the option ‘labels’ has to be set on ... more

 
   
   About this SCIA eNews  
 
» We would like to encourage you to give us your current e-mail address, if the one we used for this message, would not be correct or if you want us to send it to another address.
» If you would like to from this eNews, just send us an e-mail with 'unsubscribe' as the subject followed by the e-mail address to be deleted.
» Please let us know if there are any topics in which you are interested. We would also like to hear any suggestions or ideas you may have on improving this eNews.
 
   
     
 
SCIA Group nv - Industrieweg 1007  -  B-3540 Herk-de-Stad
 Tel: +32 (13) 55.17.75   -    Fax:+32 (13) 55.41.75
Copyright © 2006 -
SCIA International is member of the Nemetschek Group